Arizona Brecciated Jasper Cabochon - This beautiful designer shield-shaped cabochon was cut from jasper self-collected on hill our way to the Round Mountain Fire Agate Fields we've dubbed Treasure Hill -- not only did we find this lovely Jasper material, but also Unakite, Epidosite and some Fire Agates -- as well as a Pile of Coins!! If we were still doing Renaissance Festivals, this is one would would definitely be made into a masculine bezel-set pendant fit for a knight or knave!! Cabochon measures 45.2mm long (1.78") by 28.0mm wide (1.10") by 8.3mm at thickest point -- will make an excellent addition to any rock and mineral collection - or wrap to make a superb one-of-a-kind pendant.
Silver Enchantments Lapidary by Michelle designer cabochons are always handmade and diamond polished to the highest shine the stone will allow. The backside of our cabochons are considered semi-finished. They are diamond sanded to at least 220 grit, may contain flaws not visible from the front of the stone, and will generally have a slight edge bevel to reduce the chance of chipping. All of our cabochons will have a girdle that is polished to around the same level as the front of the stone and is suitable for wire wrapping or silver work. On stones sold as a loose cab we do our best to provide a girdle of equal height around each stone, but due to the infinite hardness variability of natural stone materials, girdle heights will vary in places and from stone to stone.